此液壓動力單元專為電動籃球架設計，由高齒輪油泵、電機、多用集成塊、各式液壓閥、油箱等零部件有機組合為一體。構成兩條獨立的英武的液壓上升，重力下降回路，用于籃板和籃球架走輪的升降運動，壓力補償平衡閥的應用使得籃球架走輪的下降動作十分平穩。

This power unit is designed exclusively for the electric-basketball stand,consisting of high pressure gear pump, motor, multi-functional manifold,valves and tank.etc. Constitutes the two independent martial-looking hydraulic pressure rises, the gravity lowering return route, uses in the backboard and basketball stand walks the round vibratory movement, the pressure compensation by-pass valve's application causes the basketball to carry away by force round dro the movement to be very steady.

外型尺寸Outline Dimension                                                              系統工作原理Hydraulic Circuit Diagram              

型號規格說明Model Specifications         

說明：

1.如需不同流量的泵、壓力、電機功率等系統參數，請查看液壓動力單元型號說明。

1.Please go to page 1 or consult our sales engineer for the different pump displacement,motor power or tank capacity.

注意事項Special Notes                  

1.安裝前必須保證油缸、油管、接頭等液壓元件清潔無任何雜質粘附。

1.Clean all the hydraulic parts concemed before mounting the power unit.

2.液壓油粘度應為15-68CST，應清潔無雜質，推薦使用N46號液壓油。

2.The viscosity of the oil shoud be 15-68 cst.

3.系統使用第一個100小時后，應更換液壓油，以后每3000小時更換一次液壓油。

3.Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours.

4.首次啟動運行系統時，應立即檢查油箱中的油量是否充足。

4.Check the oil level in the tank after the first star of the power unit.

5.本動力單元適用于水平安裝。

5.Mounte the pump station horizontally.