本產品是由我公司RBZ系列液壓動力單元產品中的一部分，它廣泛應用于汽車舉升機，手動閥控制回路，下降速度可調，同時還可以用作液壓叉車及剪叉式升降機的動力源。

As one part of our RBZ series power unit family,this power unit is widely used in 2-post auto hoist.Push the start button on the motor to lift the machine.The lowering movement is activated by the manual release valve,with the lowering speed controlled by the throttle valve in the retum line.The power unit also applies to different kinds of hydraulic fork lift and scissors lift.

外型尺寸Outline Dimension                                    系統工作原理Hydraulic Circuit Diagram         

型號規格說明Model Specifications         

說明Remark:

1.如需不同流量的泵、壓力、電機功率等系統參數，請查看液壓動力單元型號說明。

1.Please go to page 1 or consult our sales engineer for the different pump displacement,motor power or tank capacity.

注意事項Special Notes                  

1.此動力單元不可連續運轉，（1分鐘ON，9分鐘OFF）可重復工作。

1.The power unit is of S3 duty,which can only be worked intermittentiy,ie.,1 minute on and 9 minutes off.

2.安裝前必須保證油缸、油管、接頭等液壓元件清潔無任何雜質粘附。

2.Clean all the hydraulic parts concemed before mounting the power unit.

3.液壓油粘度應為15-68CST，應清潔無雜質，推薦使用N46號液壓油。

3.The viscosity of the oil shoud be 15-68 cst.

4.系統使用第一個100小時后，應更換液壓油，以后每3000小時更換一次液壓油。

4.Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours.

5.本液壓系統適用于垂直安裝，油箱在下。

5.Mounte the power unit horizontally.

6.首次啟動運行系統時，應立即檢查油箱中的油量是否充足。

6.Check the oil level in the tank after the first star of the power unit.