點擊圖片查看原圖
(1) Dielectric: Polypropylene Film
(2) Electrodes: Aluminum and Zinc metalaization
(3) Winding: non-inductive type
(4) Leads: CP Wire
(5) Outer coating: Flame retarding plasitic case and epoxy resin filled
(1) 能承受過壓沖擊
(2) 優異的阻燃性能
(3) 廣泛用于電源跨接線路及抗干擾場合
(4) 安全認證
(1) With standing overvoltage stressing.
(2) Excellent active and passie flame resistant abilities.
(3) Widely used in interference suppression circuit.
(4) Satety Approvals
According to the new revision of IEC 60384-14
EN 132400. UL 1414.
|
引用標準 Reference Standard
|
IEC 60384-14
|
||
| 使用溫度 Rated Temperature | -40℃~+105℃ , -40℃~+85 ℃ (UL ) | ||
| 額定電壓 Rated Voltage | 250/275 VAC | ||
| 電容量范圍 Capacitance Range | 0.001uf~1.0uf | ||
| 電容量偏差 Capacitance Tolerance | ±10%(K) ±20%(M) | ||
| 損耗角正切 Dissipation factor | 0.1%(max) at 1KHz | ||
| 耐電壓 Voltage Proof | Between Terminals: 2100VDC applied for 2 sec , C≦0.0068uf (cut off current 10mA) 1250VAC applied for 2 sec , C≦0.0068uf (cut off current 2A) 1800VDC applied for 2 sec , C>0.0068uf (cut off current 10mA) 900VAC applied for 2 sec , C>0.0068uf (cut off current 2mA) Between Terminals To cass: Nothing abnormal shall be found when apply voltage of 2050 Vac for 1 minute. |
||
| 絕緣電阻 Insulation resistance (I.R.) | ≧15 000MΩ ≧5 000MΩ |
CR≦0.33uf CR>0.33uf |
20±5℃,100VDC,1min |
