點擊圖片查看原圖
矮床酸阻滯回收酸用離子交換樹脂 Tulsion® A-32 Fine mesh
ISO-9001/ISO-14001/OHSAS-18000
ISO-9001/ISO-14001/OHSAS-18000
"堅韌膠凝體"精細型強堿性陰離子交換樹脂II型
Tulsion® A-32 Fine mesh 是一款包含季胺II型官能團的聚苯乙烯架構的“堅韌膠凝體”強堿型精細型陰離子交換樹脂。由于本身的無裂紋特性而具有優良的物理特性，比I型樹脂的堿性稍 低，因此在和I型樹脂有相同的再生程度的時候，有更高的再生效率和操作能力。主要應用在鹽酸，硫酸，硝酸，氫氟酸等回收，再生只需用純水沖洗即可回收得到 酸，由于其細粒以及矮床特性使得其可以回收得到15-20%左右的酸溶液，因此在不銹鋼酸洗，制糖業回收酸等行業廣泛利用，并受到一致好評。
|
基本性質/ TYPICAL CHARACTERISTICS
|
|
|
型式/ Type
|
: 強堿型陰離子交換樹脂/Strong base Anion Exchange Resin
|
|
結構/ Matrix structure
|
: 聚苯乙烯共聚物/Polystyrene copolymer
|
|
官能基/ Functional group
|
: 季胺II型/Quatemary Ammonium Type II
|
|
物理型式/ Physical form
|
: 含水球狀/ Moist spherical beads
|
|
離子型式/ Ionic as shipped
|
: 氯型/Chloride
|
|
粒徑分布/ Screen size USS(wet)
|
: 50 - 140
|
|
粒徑大小/ Particle size
|
: 0.1 - 0.3mm
|
|
總交換容量/Total Exc. Capacity
|
: 1.3 meq/ml (H+)
|
|
膨脹系數/ Swelling (approx.)
|
: Cl- to OH- 12%
|
|
含水份/ Moisture
|
: 47±3%
|
|
pH 作范圍/ Suitable pH range
|
: 0 to 14
|
|
溶解率/Solubility
|
: 不溶解于任何溶劑/ Insoluble in common solvents
|
|
逆洗沉降密度
|
: 690 - 720 g/L
|
|
建議操作條件 / OPERATING CONDITIONS
|
|
|
樹脂床高度/Resin bed depth
|
600 mm(24″)
|
|
最大操作溫度
|
: 60℃
|
|
最大流速/ Maximum Service flow
|
:60 BV/hr
|
|
逆洗膨脹空間
|
: 50 to 70%
|
|
逆洗流速
|
: 5-10 BV/hr
|
水力特性（HYDRAULIC CHARACTERISTICS）： Tulsion® A-32 Fine mesh
測試（TESTING）： Tulsion® A-32 Fine mesh
離子交換樹脂的抽樣和測試是按標準的測試程序，即ASTMD - 2187和IS - 7330，1998.
包裝（PACKING）： Tulsion® A-32 Fine mesh
|
Super Sack
|
1000 lit
|
Super Sack
|
35 cft
|
|
MS drums
|
180 lit.
|
MS drums
|
7 cft
|
|
HDPE lines Bags
|
25 lit.
|
HDPE lines Bags
|
1 cft
|
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
若需要更多資料，請與我公司技術人員聯系！